Mytek-digital Protools HD DIO Card (ver. 1.1 / Oct 2010) Manuel d'utilisateur télécharger pdf (Page 23)

Mytek Protools-HD DIO Card – User Manual

8. Open Setup > Hardware Setup and check:

✔ Are 8X192 ADDA Mytek Digital converters properly

detected as 192 I/O?

✔ Are signals input and output of each converter

assigned in the Input and Output tab?

✗ If not, turn off the Pro Tools application and

converters and check the connections of clock signals

between converters as well as the connections

between DIO-HD cards and with computer.

Setup > Hardware Setup

9. If the hardware configuration was changed, open Setup >

Hardware Setup and press Set To Default.

10. Set Clock Source as Internal.

11. Open or create new project with a chosen frequency.

✔ LED indicating operation at the chosen frequency

should be lit on the front panel.

✗ If LED is not lit or another frequency is indicated,

check the connection between DIO-HD cards and

with the computer.

User Manual ver. 1.1 / oct 2010 www.mytekdigital.com Page: 23 / 29

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29

Pas de commentaire

Mytek-digital Protools HD DIO Card (ver. 1.1 / Oct 2010) Manuel d'utilisateur Page 23