Mytek-digital Private-Q DL Cable Assembly Using Canare MR202-16A Manuel d'utilisateur télécharger pdf (Page 6)

11. Now prepare the power and ground wires (13,14 = GND, 15

= +29V, 16 = -29V) by stripping off ~1/4 inch and also

completely stripping the 3 inner wires and shorting them together.

Wires 13 and 14 have all 6 wires twisted together.

12. Next is to prepare the male DL connector. For the GND,

+29V, and -29V rows you will have to crimp 18 pins with a stiff,

solid wire. We use a gold plated jewelery wire.

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Pas de commentaire

Mytek-digital Private-Q DL Cable Assembly Using Canare MR202-16A Manuel d'utilisateur Page 6